Foam double-sided tape is mainly made of high-density foam and PE electronic foaming foam as the base material. It is widely used in various scenarios. The foam double-sided tape is made of paper, cloth, and plastic film as the base material. The roll-shaped adhesive tape made of body-shaped pressure-sensitive adhesive or resin-type pressure-sensitive adhesive uniformly coated on the above-mentioned substrate is composed of three parts: the substrate, the adhesive, and the release paper (film). According to the adhesiveness, it can be divided into solvent-based adhesive tape (oil-based double-sided adhesive), emulsion adhesive tape (water-based double-sided adhesive), hot-melt adhesive tape, calendered adhesive tape, and reactive adhesive tape. Generally, it is widely used in leather, nameplate, stationery, electronics, automotive trim fixing, shoe industry, paper making, handicraft pasting and positioning, etc. Hot melt double-sided adhesives are mainly used in stickers, stationery, office, etc. Oily double-sided tape is mainly used in high-viscosity aspects such as leather goods, pearl cotton, sponge, and shoe products. Embroidery double-sided tape is mainly used in computer embroidery.
①The double-sided tape with substrate is based on tissue paper, PET, PVC film, non-woven fabric, foam, acrylic foam, film, etc., and the two sides are evenly coated with elastomer pressure sensitive adhesive or resin pressure sensitive adhesive. Sensitive adhesives, acrylic pressure-sensitive adhesives, etc., roll-shaped or sheet-shaped adhesive tapes made on the above-mentioned substrates are partially composed of substrates, adhesives, and release paper (film).
②Substrate-free double-sided adhesive is a roll or sheet made of adhesive (elastomer pressure sensitive adhesive or resin pressure sensitive adhesive, acrylic pressure sensitive adhesive, etc.) on release paper (film) materials. Shaped adhesive tape is partially composed of adhesive and release paper (film). It is commonly used in leather, nameplates, stationery, electronics, automotive trimming, footwear, paper, handicrafts, etc. There are also many types of double-sided tapes: mesh double-sided tape, reinforced double-sided tape, Rubber double-sided tape, high-temperature double-sided tape, non-woven double-sided tape, double-sided adhesive-free tape, tissue double-sided tape, double-sided Glass cloth tape, PET double-sided tape, foam double-sided tape, etc., are used in the production process of various industries.
For the removal of foam double-sided adhesive sticky marks, many people use methods such as eraser to remove marks, wind oil to remove marks, hair dryers to remove marks, etc. In the end, not only did it fail to remove the sticky marks, but it became worse, and the black sticky Glue on it particularly affects the aesthetics and also affects the integrity of the pasted object itself. So how to quickly remove the sticky marks of double-sided foam tape. The correct way to remove the sticky marks of double-sided foam tape.
The first step: prepare a multi-functional glue remover, generally sold in supermarkets and stores, you can also buy it online, well, to get back to the point, first use the multi-functional glue remover to apply the adhesive on all sides. Make it penetrate faster from the edges.
Step 2: After about ten seconds, use a scraper to shovel the double-sided tape from the side. Because the time has not been long, it may not fully react with the glue, you can use more force at this time.
The third step: When we shovel a little angle, the opening part can be dripped with a multi-functional glue remover again to dissolve the glue inside, and then use a scraper to shovel it, well, at this time all are scraped off.
The fourth step: Because the foam glue sticks for too long, it is easy to leave some glue on it, we can drop the glue again, and then wipe it with a paper towel to quickly remove the sticky marks. The above is the method to quickly remove the sticky marks of the double-sided foam tape. During the operation, you must pay attention to the test from a small area first, and operate in a ventilated environment.