What is electrical PVC tape?
The full name of electrical tape is PVC electrical insulation adhesive tape, and some people call it electrical insulation tape or insulation tape. It has good insulation, flame resistance, voltage resistance, cold resistance and other characteristics. It is suitable for wire winding, transformers, motors, capacitors, voltage stabilizers and other electrical and electronic parts insulation and fixation. There are red, yellow, blue, white, green, black, transparent and other colors.
The correct use of electrical PVC tape is as follows:
The power cord connector is divided into “ten” word connection, “one” word connection, “D” word connection, etc., winding is divided into self-winding, mutual winding and so on. The joint should be tightly wound, smooth and free of burrs. Before disconnecting the thread, you should press it lightly with wire pliers, then wrap it to the pressure port, and then swing it left and right. The thread will be compliantly disconnected at the joint. If the joint is in a dry place, first wrap two layers of insulating black tape, and then two layers of plastic tape (also called PVC adhesive tape); if the joint is in a damp place or in water, first wrap two layers of insulating black tape before using The J-10 insulating self-adhesive tape is stretched about 200%, wrapped in two or three layers, and finally wrapped with two layers of plastic tape.